FAQ

How to remove extra links for sizing

Revo Locarno, and Velo

We constructed each steel band to use screws rather than cheaper friction pins that so many bracelets use, so it’s also not difficult to do yourself.  We also include a screwdriver with every band you purchase. Here's a video to demonstrate the link removal process:


 

Ligero, Vitero, Velo and Qrono

In our aluminum bands, we've custom designed and developed a proprietary adjustment tool that's very easy to use. With the additional customization of using concave pins, you'll be able to resize your aluminum band in just a few minutes and can use it right away, right out of the box:

 

How to insert the metal bands into the Apple Watch

We made one needed modification to the endpiece mechanism, so installing the bands just require a simple push of each locking mechanism to insert the ends into the Watch, as this quick video demonstrates:


 

How to adjust and use the leather band deployant buckles


 

Are your bands sweat and waterproof?

For our steel and aluminum bands, most definitely. We use only 316L stainless steel or 6000 series, hard anodized aluminum on our metal bands. These metals can withstand your daily workout routines or a dip in the ocean or pool.

As with the Apple Watch itself, just rinse the bands under tap water to wash off the sweat, salt water or chlorine and you're good to go!

For our leather bands, treat them as you would any fine leather product; keep them dry as much as possible and you should be able to enjoy them for a long time.

 

I've seen cheaper bands on the market; what's the difference?

Many of the other bands use a cheaper folded steel buckle and most would use cheaper friction pins for the adjustable links (where we use screws and will provide a screwdriver for so that you can do it yourself).

The other difference, which may or may not be discernible, is the level of fit and finish.  We can take the same design and make them in two different factories, resulting in very different costs.  The cheaper factory’s band may look similar from a distance, but it’s probable that their polishing, fit and finish will not be as precise as the one costing more where the workers are better trained and paid, the factory has a stricter QC standard (which leads to more rejects and hence, higher costs), etc. Better made watch components will have a better finish even in the areas that aren't exposed with normal usage. This is one of the reasons why Swiss and other higher end watches cost more.

We'd like to stress again that our metal bands are made in factories that also manufacture for Swiss brands. If their quality wasn't the best, these Swiss companies wouldn't entrust their reputation to these factories.  Put another way, if these Swiss companies went to cheaper factories and offered the same amount of money to make a component, chances are, these cheaper factories couldn't produce at the quality needed to pass their Swiss QC standards.  Many factories are efficient at making the appropriate quality because of the way they're set up (machinery, worker training/skills, etc.) but it's not quite so easy to just "up" the quality if they aren't built for that.

These seemingly small differences add up to a much more luxurious experience.